|
 
- Wirelessly communicate to serial devices through an Ethernet network.
- Allows access/configuration of equipment from
virtually anywhere via the Internet.
- Comprehensive networking
protocols (see table below).
- Equipped with a CPU,
real-time
OS and TCP/IP stack.
|
|
ConnexNet provides a complete hardware
and software solution for adding wireless network connectivity
to serial-based applications. The transceiver serves as a conduit
between the user and multiple destination devices via a local
network or Internet connection. It integrates a fully developed
TCP/IP network stack and OS using a variety of network protocols
to make distant networking both easy and reliable.
Each unit is small and easily portable for use in mobile and temporary
settings as well as for fixed installations. ConnexNet software
enables custom configurations based on unique application requirements,
and simplifies installation and setup. The network settings can
be configured remotely over a network (password protected).
ConnexNet uses FHSS modulation, ensuring
reliable transmissions over long distances. Use of license free
frequency bands ensure that the units are ready to use with no
further certification requirements. ConnexNet is approved for
operation by FCC (USA) and IC (Canada). See ConnexNet's specifications
and protocol stack in the table below.
|
|
 |
|
| Specifications |
CN4790-1000 |
CN4490-1000 |
| Frequency
band, modulation |
902 - 928 MHz, FHSS
|
902 - 928 MHz, FHSS
|
| Dimensions |
4.4 x 2.7
x 1.4 inches
(111 x 69 x 36 mm) |
4.4 x 2.7
x 1.4 inches
(111 x 69 x 36 mm) |
| Weight |
6 oz (170
g) |
6 oz (170
g) |
| Cord
length |
6 feet (
183 cm) |
6 feet (
183 cm) |
| Serial
Interface |
Serial RS232 DB9 female connector
|
Serial RS232 DB9 female connector
|
Network
Interface
Standard
Physical layer
Mode |
IEEE 802.3
10/100BaseT
Half-duplex and full-duplex
|
IEEE 802.3
10/100BaseT
Half-duplex and full-duplex
|
| Interface
Connector |
RJ-45
|
RJ-45
|
| Data
rate |
Up to 115.2 Kbps
|
Up to 115.2 Kbps
|
| Output
power |
1000mW
|
1000mW
|
| Transmission
range |
Up to 1500 feet (450 m) indoors;
Up to 20 miles (32 km) line-of-sight
|
Up to 1500 feet (450 m) indoors;
Up to 20 miles (32 km) line-of-sight
|
| Power
supply |
6-foot cable, AC power connector
|
6-foot cable, AC power connector
|
| Power
draw (@ 12 Vdc) |
400mA TX, 40mA RX
|
400mA TX, 40mA RX
|
| Electrical
requirements |
Line voltage 100 - 120V (240V outside
US);
Frequency 50 - 60 Hz
|
Line voltage 100 - 120V (240V outside
US);
Frequency 50 - 60 Hz
|
| Environmental
conditions |
Operating temperature -40° to
+80°C; 10% to 90% humidity (non-condensing)
|
Operating temperature -40° to
+80°C; 10% to 90% humidity (non-condensing)
|
| Configuration
software |
Optional easy-to-use software for
Windows
|
Optional easy-to-use software for
Windows
|
| Function |
Protocols |
| Network
communication |
ARP, UDP, TCP, ICMP, TelNet, TFTP,
AutoIP, DHCP, HTTP, SNMP
|
| Connections
to serial port |
TCP, UDP,
PPP, TelNet |
| Firmware
update |
TFTP |
| Addressing,
routing, data block handling over the network |
IP |
|
